PoE allows power to be supplied to end devices, such as WirelessAP or VoIP Phones, directly through the existing LAN cables. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure.
Features :
•Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX and IEEE 802.3x flow control standards •Supports 10/100Mbps auto-detect half/full duplex
•Supports TP auto MDI/MDI-X function for auto TX/RX swap
•Supports 802.3x flow control pause packet for full duplex
PoE Features :
•Supports IEEE 802.3af compliant
•Supports Power over Ethernet (PSE) on each PoE-TP port (End-Point)
•Full power(15.4w) support for per PoE-TP port
•Auto detect powered device and consumption levels
•Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority (X)
•Automatic Fault Detection (Over/Under Voltage & Current)
•Thermal shutdown protection (Tj> 150ºC)
Product |
ES-5844P |
Standards |
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX |
No. of Ports |
8*10/100 Mbps RJ-45 ports with 4 PoE ports |
Transmission Mode |
10/100Mbps, full/half-duplex (Auto-sensing) |
Transfer Rate |
10Mbps: 14880pps (64 Bytes Package) 100Mbps: 148800pps (64 Bytes Package) |
Flow Control |
IEEE 802.3x flow control for full-duplex Back pressure in half-duplex operation mode |
Switching Method |
Store & forward |
LEDs |
Power, Link/Act, Speed, PoE activity |
Temperature / Humidity |
0°to 50°C / 5% to 90% |
Voltage / Frequency |
AC 90-264V / 47-63Hz |
Power Consumption |
65W, -48VD, 1.35A |
Physical Dimension |
44(H) X 220(W) X 130.5(D) mm |
Safety |
FCC Part 15 Class A & CE Mark Approval |