Wireless 802.11n Access Point With Power over Ethernet

EW-7415PDn

  • Complies with the IEEE 802.11b/g and IEEE802.11n standards.
  • Supports 2.4000~2.4835GHz frequency band.
  • High data rate up to 300Mbps network speed.
  • Auto rate fallback in case of obstacles or interferences.
  • Supports point-to-point and point-to-multi point bridge function.
  • Supports WDS (Wireless Distributed System) repeater mode.
  • Supports Universal Repeater mode.
  • Supports AP Client mode.
  • Supports four sets of ESSID to group the different wireless networks.
  • Support WEP, WPA, WPA2 securities and RADIUS server authorization function.
  • Supports WPS (Wi-Fi Protected Setup) function.
  • Provides MAC access control.
  • Supports hidden SSID function.
  • Supports Web-based configuration.
  • Firmware upgradeable via Web browser.
  • Complies with IEEE 802.3af Powered Device (PD) standard.


  • 802.11n Draft 2.0 Wireless LAN Access Point
    Acting as a bridge between the wired Ethernet and the 2.4GHz IEEE 802.11b/g/n wireless LAN, this wireless LAN access point can let your wireless LAN client stations access both the wired and the wireless network nodes.

    WDS Bridge Mode (Repeater Mode)
    The WDS (Wireless Distributed System) function let this access point acts as a wireless LAN access point and repeater at the same time. Users can use this feature to build up a large wireless network in a large space like airports, hotels and schools …etc. This feature is also useful when users want to bridge networks between buildings where it is impossible to deploy network cable connections between these buildings.

    Robust Wireless LAN Security (WPA, WPA2 support)
    Except for the basic security control by using ESSID and 64/128 bit key length WEP encryption, this access point also supports the advanced security features, like MAC access control, IEEE 802.1x authentication, TKIP, AES and hide ESSID. It provides a total solution for you to build up a secure wireless LAN network environment that can prevent from all kinds of hacker intrusion.

    Web Configuration
    You can configure this access point through the friendly Web user interface with a browser.

    Two Power Supplying option
    This access point Integrated PoE PD and also provides power jack for regular power adapter. Users can connect the access point with power adapter or PoE switch for power supply.



    Product
    Wireless 802.11n Access Point with PoE

    Soc + RF

    Ralink RT3052

    Flash

    4 MB Flash

    RAM

    16 MB SDRAM

    LAN Port

    10/100M UTP Port x 1

    Antenna

    Detachable 3dBi Dipole Antenna x 2 (2T2R MIMO Technology)

    Output Power

    11n: 14±1dBm, 11g: 15±1dBm,
    11b: 17±1dBm

    Power

    12VDC, 1A Single Range Switching Power Adapter

    Dimension

    30(H) x 127(W) x 96(D) mm

    Temperature

    Operating: 0~40 ℃
    Storage: -20~60 ℃

    Humidity

    Operating: 10~90% (Non-Condensing)
    Storage: Max. 95% (Non-Condensing)

    Certification

    CE,FCC

    *此產品無線傳輸的最大速度乃依據無線網路標準規範,實際數值資料與覆蓋範圍則依據實際網路環境而有所不同。
    *網路攝影機的實際影像解析度及幀速率,會依實際網路連線速度而不同。
    *本網頁所登載產品之規格、功能或外觀等資訊,可能因產品改良而變更,以實際銷售產品為主,恕不另行通知。