16 Ports 10/100Mbps Rackmount Switch

ES-3116RL

(End-of-Life Product)

  • 16 Ports 10/100Mbps Switch
  • MDI/MDI-X and Full/Half Duplex Auto-Negotiation 
  • Store and Forward Swtiching Architecture
  • Flow Control: Back Pressure for Half-duplex Mode, IEEE 802.3x for Full Duplex Mode
  • Compact 19" Rackmount size


General Description

The device is a powerful, high-performance Fast Ethernet switch, with all 24 / 26 ports capable of 10 or 100Mbps auto-negotiation operation (N-Way) which means the switch could automatically negotiate with the connected partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller, connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging applications.

Moreover, the 10/100Mbps auto-sensing ability provides an easy way to migrate 10Mbps to 100Mbps network with no pain. Compared to the shared 10Mbps or 100Mbps networks, the switch delivers a dedicated 10/100Mbps connection to every attached client with no bandwidth congestion issue. Store-and-forward switching mode promises the low latency plus eliminates all the network errors, including runt and CRC error packets.

To work under full-duplex mode, transmission and reception of the frames can occur simultaneously without causing collisions as well as double the network bandwidth. The switch is plug-n-play without any software to configure and also fully compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front-panel provide the operating status of individual port and whole system.
 

Key Features

  • Complies with 10Base-T and 100BASE-TX specifications
  • RJ-45 ports for 100Base-TX and 10Base-T connectivity
  • Supports N-Way protocol for speed (10/100Mbps) and duplex mode (Half/Full) auto-detection
  • Supports MDI/MDI-X auto crossover
  • Supports full and half duplex operation on all ports
  • Supports back-pressure (half duplex) and flow control (802.3x)
  • Wire-speed packet filtering and forwarding rate
  • Store & forward architecture filters fragment & CRC error packets
  • Supports 8K MAC entries
  • 160K bytes buffer memory
  • Supports extensive LED indicators for network diagnostics
  • 19-inch standard rack-mountable design
  • Internal universal switching power supply
  • FCC Class A, VCCI Class A , CE

     

 



 

Model No.

ES-3116RL

Standard  

IEEE802.3, IEEE802.3u and IEEE802.3x standards

Interface

10/100Mbps RJ-45 NWay ports

NWay Protocol Support

Network speed: 10Mbps and 100Mbps
Duplex mode: Full and Half

Buffer Memory

160K bytes for the whole system

Filtering/Forwarding Rate

10Mbps: 14,880pps/14,880pps
100Mbps: 148,800pps/148,800pps

Emission

FCC Class A, VCCI Class A, CE

Rich LED indicators

System: Power
Port: Link/Act

Operating Temperature

00- 400C (320- 1040F)

Operating Humidity

10% ~ 90% (non-condensing)

Dimension

441 x 130 x 44 mm

Power Supply

3.3V 4A (100 ~ 240VAC, 50~60 Hz)

        

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.