 |
|
HARDWARE INTERFACE
|
MANAGEMENT
|
POWER ADAPTER & BATTERY
|
- One 10/100Mbps Ethernet Port for WAN or LAN Connection
- One USB 2.0 for 3G/3.5G USB Modem
- One Mini USB Power Adapter
- LED Indicators: PWR/CHG, WLAN, WPS, ETHERNET,INTERNET
- WPS/Reset Button
- Switch 1 for LAN/WAN (Ethernet Port)
- Switch 2 for Power ON/OFF
|
- Supports Remote Management
- System Status and Security Log (Web Interface)
- Firmware Upgradeable
|
- Battery 3.7V, 1880mAh
- DC 5V, 2A Switching Mini USB Type Power Adapter
|
|
WAN
|
INSTALLATION
|
MEMORY
|
- Supports 3G/3.5G (UMTS/HSDPA/CDMA)
- Supports cable/ xDSL modem
- WAN protocol: PPPoE /Static IP/PPTP/Dynamic IP /L2TP
|
- 16-language EZMax Setup Wizard to setup Internet connection, SSID, wireless security and firmware upgrade
|
- 4 MB NOR Flash
- 16 MB SDRAM
|
|
SECURITY
|
TEMPERATURE Output Power & Receive Sensitivity
|
|
- NAT/NAPT IP Sharing
- 64/128-bit WEP Encryption and WPA-PSK, WPA2-PSK security
- DHCP Server
- MAC/IP Filter and URL Blocking
- Anti-Dos Firewall
|
- Internal Printed Antenna
- 11n: 14±1.5dBm
11g: 14±1.5dBm
11b: 17±1.5dBm
|
- 10-90%(Non-condensing)
- 0°C ~40°C
|
|
FUNCTIONS
|
DIMENSIONS
|
CERTIFICATIONS
|
- Supports 3G and xDSL connection Fail Over
- Port Triggering for Special Applications
- DDNS, WMM and QoS
- Virtual Server and DMZ
- Supports UPnP
- VPN Pass Through (IPSec/PPTP)
|
- 125 x 85 x 25 mm 102 (W) x 69 (D) x 16 (H) mm
|
|
NETWORK SETUP DIAGRAM AND RELATED PRODUCTS
An example of how the 3G-6210n can be setup:
- Connect the 3G/3.5G USB modem card to 3G-6210n router USB port.
- Connect a computer to the Ethernet port and setup the Internet connection by running the multi-language setup wizard.
- Share the Internet connection by connecting wired or wireless computers. ** You can switch Ethernet port as a WAN port, and connect 3G-6210n router Ethernet port to your cable/ xDSL modem as a backup.

|
 |