8 Port Fast Ethernet Switch Integrate 4 x Power over Ethernet Ports

ES-5844P

(For Middle East Only)

  • Complies to IEEE 802.3, IEEE802.3u and IEEE 802.3af (Power over Ethernet) 
  • Supports 10/100Mbps Auto-Detection Half/Full Duplex
  • Max Power Output (15.4w) for each PoE TP Port (Port 1~4)
  • Auto Detect PD On/Off, Power Level and Feeding Priority
  • Auto Detect PD Power Consumption Level
  • Fault Detection (Over/Under Voltage & Current)


PoE allows power to be supplied to end devices, such as WirelessAP or VoIP Phones, directly through the existing LAN cables. By supplying the power end-span, you can centralize power distribution and backup without the need to increase infrastructure. 

Features :
•Conforms to IEEE 802.3 10BASE-T, IEEE802.3u 100BASE-TX and IEEE 802.3x flow control standards •Supports 10/100Mbps auto-detect half/full duplex
•Supports TP auto MDI/MDI-X function for auto TX/RX swap
•Supports 802.3x flow control pause packet for full duplex

PoE Features :
•Supports IEEE 802.3af compliant
•Supports Power over Ethernet (PSE) on each PoE-TP port (End-Point)
•Full power(15.4w) support for per PoE-TP port
•Auto detect powered device and consumption levels
•Smart feature for PD on/off, PD detection, power level, PD status and power feeding priority (X)
•Automatic Fault Detection (Over/Under Voltage & Current)
•Thermal shutdown protection (Tj> 150ºC)



 

Product

ES-5844P

Standards

IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX

No. of Ports

8*10/100 Mbps RJ-45 ports with 4 PoE ports

Transmission Mode

10/100Mbps, full/half-duplex (Auto-sensing)

Transfer Rate

10Mbps: 14880pps (64 Bytes Package)
100Mbps: 148800pps (64 Bytes Package)

Flow Control

IEEE 802.3x flow control for full-duplex
Back pressure in half-duplex operation mode

Switching Method

Store & forward

LEDs

Power, Link/Act, Speed, PoE activity

Temperature / Humidity

0°to 50°C / 5% to 90%

Voltage / Frequency

AC 90-264V / 47-63Hz

Power Consumption

65W, -48VD, 1.35A

Physical Dimension

44(H) X 220(W) X 130.5(D) mm

Safety

FCC Part 15 Class A & CE Mark Approval

        

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.