The Edimax Pro GS-5424PLC smart switch comes with web-based user interface, 24 Gigabit PoE+ ports and 4 RJ45/SFP combo ports for high-speed Gigabit and long-range copper or optical connections. With smart features in SNMP v3, PoE PD Alive Check, Dual Firmware, Voice VLAN, DHCP Snooping, QoS, CoS, STP, 802.1Q VLAN, IPv4/IPv6, Port Trunk, IGMP v1/v2/v3 Snooping and Mirror, the smart switch provides a cost effective, reliable, scalable and secure switch solution for SMB networks. The Edimax-specific long range mode enables power and data transmission to up to 200 meters at a speed of 10Mbps, tailored for IP cameras and far away network device applications. The PoE also features auto detection and power backfeed protection to efficiently provide power and, at the same time, avoid damaging the PoE ports. The Edimax GS-5424PLC is the ideal solution to increase the distance/speed of your network server and backbone connections.
Complies with IEEE802.3/802.3u/802.3ab/802.3z Gigabit Ethernet Standards, the GS-5424PLC features 24 Gigabit Ethernet ports for high-speed, large file transfer and 4 SFP slots for long range optical fiber Gigabit Ethernet connections.
The GS-5424PLC features 24 IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30W of electricity per port and has a total power supply of 450W to power any 802.3at or 802.3af compliant power device. With PoE detection capability, the GS-5424PLC is able to verify whether the connected device is IEEE 802.3at or 802.3af compliant. If a PoE device is not detected, only network data will be transmitted. Moreover, with the PoE power backfeed protection from the passive PoE injectors, the GS-5424PLC is able to avoid damaging the PoE ports.
Power over Ethernet technology enables the Ethernet cable to carry both data and power, reducing cable installation and eliminating the need for extension cords or electrical outlets on the walls and ceiling. The GS-5424PLC can effectively lower installation costs and simplify deployment effort. The GS-5424PLC can be used with different PoE products such as access points, IP cameras or VoIP devices and is an effective solution for network environments where power outlets are difficult to access.
Featuring PoE Powered Device (PD) alive check, the switch can be configured to monitor real-time status of connected PDs by ping action (sending alive-checking packets). If a PD fails to response, the GS-5424PLC PoE Switch will reboot the PD, which enhances the reliability of the network and reduces administrator management burden.
The long range mode provides extended power and data delivery distance to up to 200 meters while general Ethernet switches have a distance restriction of 100 meters. The long range mode operates on a per-port basis at 10Mbps full-duplex operation, ideal for devices such as IP cameras, IP phones and PoE-enabled IoT devices at a remote location.
The dual firmware feature allows switches to have two firmware in storage. You can denote one of these firmware as the active one and the other firmware as the backup. If the active firmware faces problems, you can activate the backup firmware right away to reduce down time.
Voice VLAN is a special function of GS-5424PLC switch which allows network administrator to easily prioritize IP voice traffic from IP phone through the access port of switch to enhance VoIP service. Voice VLAN also provides QoS to VoIP, ensuring that the sound quality of an IP phone does not deteriorate when the IP voice traffic is sent unevenly.
The network security feature of DHCP snooping enables the prevention of malicious or malformed DHCP traffic or the mitigation of security risks from rogue DHCP servers. The feature monitors DHCP messages received from untrusted devices connected to a switching device in the network and protects the integrity of legitimate DHCP server and its operations.
The switch features smart and simple network monitoring tools that allow for improved network efficiency and security. The web-based interface management features include QoS (Quality of Service) bandwidth control for better traffic control, VLAN (Virtual LAN) for enhanced network security and multicast IGMP snooping v1/v2/v3 for streaming applications. For quick and easy setup, the web-based management integrates advanced management and security functions of Access Control List (ACL), CoS, STP, IPv4/IPv6, Port Trunk, IGMP v1/v2/v3 Snooping and Mirror.
MG-1000 Series V2 1000Base-T SX LX SFP Modules
|Ports||24 x RJ-45 10/100/1000Base-T PoE ports
4 x RJ45/SFP Gigabit combo ports
|Transmission Method||Store and forward|
|LED Indicators||Per Port: Link/Act
Per Unit: Power
|Power Input||100-240V AC, 50-60 Hz, internal power supply|
|Total Power Budget||400W|
|Fan||2 x Fans with hot-swappable fan tray|
|Surge Protection||Support 6KV surge protection on RJ45 port (port 25-28)|
|Dimensions (L x W x H)||441 × 270 × 45 mm|
|Forwarding Rate||41.4 Mpps|
|Buffer Memory||1M bit|
|Filtering/Forwarding Rates||1000Mbps port – 1,488,000pps
100Mbps port - 148,800pps
10Mbps port - 14,880pps
|POWER OVER ETHERNET|
|Standard||IEEE 802.3af, IEEE 802.3at|
|Power Output||Up to 30W per port|
|Pin Assignment||1/2(+), 3/6(-) End-Span (mode A)|
|Management||PoE status, PoE on/off, PoE PD alive check, per port priority setting|
|Long Range||Enable long range mode at 10Mbps for cable distance up to 200 meters|
|Quality of Service (QoS)||Rate limiting on packets sent and received by an interface
Eight queues on each port
WRR, SP, WRR+SP queue scheduling algorithms
Re-marking of the 802.1p priority and DSCP priority
Rate limiting in each queue and traffic shaping on ports
|Class of Service (CoS)||IEEE 802.1p class of service (SPQ, WRR)
IP TOS precedence
802.1p VLAN Information based CoS
DSCP based CoS
TCP/UDP Based CoS
|Spanning Tree||IEEE 802.1d Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
|VLAN||Up to 200 VLANs and 4096 VLAN IDs
802.1Q tag-based VLAN
|IPV6||IPv6 over Ethernet (RFC 2464)
Dual-stack (RFC 4213)
ICMPv6 (RFC 4884)
Neighbor discovery (RFC 4861)
Static IPv6 address and prefix length
Static IPv6 default gateway
IPv6 duplicate address detection
|Port Trunking||IEEE 802.3ad LACP Trunk-Static trunk up to 8 trunk groups|
|IGMP Snooping||IGMP v1/v2/v3 snooping|
|Mirror||Port mirroring both on ingress and egress traffic|
Dynamic ARP Inspection
IP Source Guard
|Management||User Interface: Web-based management
User Account: Login account configuration
Firmware Upgrade: Firmware upgrade by WEB
Syslog: Support event log, alarm log and security log
|Temperature||Operating: 0 ~ 50℃
Storage: -40 ~ 70℃
|Humidity (Non-condensing)||Operating: 10 ~ 90%
Storage: 10 ~ 90%
IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE 802.3ab 1000BaseT Gigabit Ethernet
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet Plus (PoE+)
IEEE 802.3x Full-duplex and flow control
IEEE 802.1p Quality of Service (QoS)
IEEE 802.1x Port-based Network Access Control(PNAC)
IEEE 802.1Q Virtual LANs VLANs
IEEE 802.1d Spanning Tree Protocol(STP)
IEEE 802.1w Rapid Spanning Tree Protocol(RSTP)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3az Energy Efficient Ethernet
|Certifications||FCC Class A, CE|