Surveillance VLAN 12-Port Gigabit PoE+ Long Range Web Smart Switch with 2 Gigabit RJ45 Ports and 2 SFP Ports

GS-5210PL

  • Supports fast and easy system settings, device discovery, and user authentication.
  • Guaranteed PoE long distance to 200 meters.
  • PoE powered devices (PD) alive check to enhance the reliability of the network. If a PD fails to respond, the GS-5210PL will reboot the PD.
  • IEEE 802.3af/at PoE compliant, up to 30W per port (total power budget: 110W) for powering PoE-enabled devices.
  • Dual-firmware image for robust failover mechanisms. It can activate the backup firmware right away while the current one faces problems.
  • IP Surveillance VLAN and Voice VLAN to enhance video and voice quality.
  • 4-digit LED display showing total PoE power, available power, and power consumption.
  • Auto-detection of powered devices (PD) and power consumption levels.
  • Power backfeed protection to avoid damaging the PoE ports.
  • DHCP snooping to protect the integrity of legitimate DHCP server and its operations.
  • Supports SNMP v3, Access Control List (ACL), QoS, CoS, STP, 802.1Q VLAN, IPv4/IPv6, Port Trunking, IGMP v1/v2/v3 Snooping and Port Mirroring.


For Quick Install of Security Devices

The GS-5210PL provides system integrators easy setup, quick discovery, configuration, and product control on the network. Just plug and play.

Beyond Security | All Fit Together 

The EDIMAX switches series greatly enhances IP surveillance network systems; it supports fast and easy system settings, device discovery, and user authentication.

Let Safety be Known

The built-in power backfeed protection/ PoE detection function keeps the PoE network safe and efficient.

Strong Ability to Proceed Data

With 24Gbps backplane bandwidth and a forwarding rate of 17.8Mpps, the GS-5210PL provides maximum available bandwidth without delay.

Robust Failover Mechanisms 

The GS-5210PL has two firmware stored for backup. It can activate the backup firmware right away while the current one faces problems.

Guaranteed 200 Meters | Going the Distance

While general Ethernet switches have a distance restriction of 100 meters, the GS-5210PL long-range mode provides extended power and data delivery distance to 200 meters (656 ft.) at 10Mbps full-duplex operation on a per-port basis. It's ideal for long-distance applications such as IP cameras, VoIP phones, access points, and PoE-enabled IoT devices at remote locations.




4-digit LED Display | Knowing Instant Power Data

In addition to a web-based GUI to keep track of port power, the GS-5210PL features an intuitive 4-digit LED display showing its power consumption. System integrators can check the total power budget, power consumption per port, and available power left. All with a single hardware select button.

Safe Power Backfeed Protection

Each port is equipped with power backfeed protection to avoid damaging the PoE ports while the non-standard PSE (Power Sourcing Equipments) are connected.

Networking Scenarios



SPECIFICATIONS
 
HARDWARE
Ports 10 x RJ45 10/100/1000Base-T Gigabit ports
2 x SFP uplinks
Transmission Method Store and forward
Buttons Reset button
LED Indicators Per Port: Link/Act, PoE: Act/Status, Per Unit: Power 
Power Input 100-240V AC, 50-60 Hz, internal power supply 
Total Power Budget 110W
Dimensions (L x W x H) 330 × 230 × 44 mm
Weight 2.3kg
PERFORMANCE
Switching Capacity 24Gbps
Forwarding Rate 17.8Mpps (64-byte package size)
MAC Address 8K Bytes
Jumbo Frames 9K Bytes
Filtering / Forwarding Rates 1000Mbps port – 1,488,000pps
100Mbps port - 148,800pps
10Mbps port - 14,880pps
POWER OVER ETHERNET
Standard IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
Power Output Up to 30W per port
Pin Assignment 1/2(+), 3/6(-) End-Span (mode A)
Management PoE status, PoE on/off, PoE PD alive check, per port priority setting
PoE Long Range Guaranteed PoE long range to 200 meters at 10Mbps
Power Backfeed Protection Built-in
SMART FEATURES
Quality of Service (QoS) Rate limiting on packets sent and received by an interface
Eight queues on each port
WRR, SP, WRR+SP queue scheduling algorithms
Re-marking of the 802.1p priority and DSCP priority
Rate limiting in each queue and traffic shaping on ports
Class of Service (CoS) IEEE 802.1p class of service (SPQ, WRR)
Port-based CoS
IP TOS precedence
802.1p VLAN Information based CoS
DSCP based CoS
TCP/UDP Based CoS
Spanning Tree IEEE 802.1d Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
VLAN Up to 200 VLANs and 4096 VLAN IDs
802.1Q tag-based VLAN
Port-based VLAN
Surveillance VLAN
Voice VLAN
MAC VLAN
GVRP
IPV6 IPv6 over Ethernet (RFC 2464)
Dual-stack (RFC 4213)
ICMPv6 (RFC 4884)
Neighbor discovery (RFC 4861)
Auto configuration
Static IPv6 address and prefix length
Static IPv6 default gateway
IPv6 duplicate address detection
Port Trunking IEEE 802.3ad LACP Trunk-Static trunk up to 8 trunk groups
IGMP Snooping IGMP v1/v2/v3 snooping
Port Mirroring Port mirroring both on ingress and egress traffic
Security RADIUS
AAA
Management Access
Authentication Manager
Port Security
Protected Port
Storm Control
DoS
Dynamic ARP Inspection
DHCP Snooping
IP Source Guard
Management User Interface: Web-based management
User Account: Login account configuration
Firmware Upgrade: Firmware upgrade by WEB
Syslog: Support event log, alarm log and security log
ENVIRONMENT
Temperature Operating: 0 ~ 50℃
Storage: -40 ~ 70℃
Humidity (Non-condensing) Operating: 10 ~ 90%
Storage: 10 ~ 90%
STANDARDS COMPLIANCE
Standards IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE 802.3ab 1000BaseT Gigabit Ethernet 
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.3at Power over Ethernet (PoE+)
IEEE 802.3x Full-duplex and flow control 
IEEE 802.1p Quality of Service (QoS)
IEEE 802.1x Port-based Network Access Control(PNAC) 
IEEE 802.1Q Virtual LANs VLANs
IEEE 802.1d Spanning Tree Protocol(STP) 
IEEE 802.1w Rapid Spanning Tree Protocol(RSTP)
IEEE 802.3ad Link Aggregation Control Protocol (LACP) 
IEEE 802.3az Energy Efficient Ethernet
Certifications FCC Class A, CE
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.