8 Ports Fast Ethernet Switch

ES-3208P

(For Middle East Only)

  • Complies with the IEEE 802.3 and IEEE 802.3u standards.
  • Provides Store-and-Forward architecture , Full Wire Speed forwarding and filtering rates
  • Supports Auto-MDI/MDI-X, full/half duplex modes and auto-negotiation.
  • Supports flow control and Non-blocking architecture



200Mbps Full Duplex Transmission 
Edimax ES-3208P is a high speed fast Ethernet switch for home and small business. ES-3208P not only complies with  IEEE 802.3/802.3u 10/100Mbps Ethernet standard but also supports full duplex transmission. The full duplex feature can double the network throughput on every port. It is used for high speed server or switch-to-switch connections. The maximum throughput of every port can reach up to
200Mbps .

Supports Wire-speed and Flow Control
The ES-3208P built-in non-blocking and store-and-forward architecture feature your network with full-wire speed connections. It accommodates with flow control for full duplex mode and back pressure for half-duplex mode which ensure reliable data transfer and help to prevent data lost. Use ES-3208P to create a high-speeds network and benefit from it's ultimate performance and
reliability.

Supports Auto-MDI/MDI-X and Auto Sensing
ES-3208P supports PnP (plug and play) installation and auto-MDI/MDI-X function. You can connect ES-3208P with computers or Ethernet devices without any configuration. You also can use either straight-through or cross-over Ethernet cable and combine 10 and 100Mbps devices into ES-3208P.
The switch will automatically detect the right cable and speed for your device.

Power Saving
With new generation power saving mode, ES-3208P can reduce power consumption. It is the best solution for home and small business.



HARDWARE INTERFACE

FUNCTIONS

POWER ADAPTER

  • 8 x RJ-45 Fast Ethernet LAN Ports
  • LED Indicators: Power, LNK/ACT for LAN
  • Power
  • Non-Blocking
  • Store-and-Forward architecture
  • Full wire speed filtering
  • Auto-MDI/MDI-X and auto learning
  • Auto-negotiation

DC 5V, 0.6A

STANDARD

HUMIDITY & TEMPERATURE
MEMORY BUFFER
  • IEEE802.3 and IEEE802.3u
  • IEE802.3x
  • 10-95% (Non-condensing)
  • 0~45 Degree Celsius

448K bits

MAC Address

DIMENSION

CERTIFICATIONS
  • 2K
  • 160 x 82 x 25 mm

CE, FCC

 

NETWORK SETUP DIAGRAM AND RELATED PRODUCTS
An example to setup ES-3208P:

 

 

 

 

  • Connect the ES-3208P to your Router or cable/ xDSL modem.
  • Connect a computers to ES-3208P.
  • You can also connect Print Server, NAS and IP CAMERA to ES-3208P.

     

     

     

 

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.