Adding the capability of IEEE 802.3af/at/bt Power over Ethernet to a non-PoE Ethernet switch or router to supply the transmission both power up to 60W and data at the same time to the PoE-enabled devices where power outlet is unavailable.
Just plug the Ethernet enabled device into the injector. No additional cables, software setup or configuration required.
Featuring PoE short circuit protection and over circuit protection to safeguard network devices and protect against damage.
PoE Application Scenario
With the PoE++ Injector, the data and power are transmitted to the remote IEEE 802.3af/at/bt compliant products located without power outlet through the Ethernet cabling.
|Other PoE Devices
|IP surveillance camera is now ubiquitous PoE supported with only one LAN cable which enables fast deployment and easy repositioning for home, office and business.
|Access points, installed on a wall or ceiling where AC outlets are unreachable, are commonly PoE compatible to allow flexible deployment for best Wi-Fi coverage.
|For the VoIP phones, there’s no need to support desktop phones with additional power supply as power is transmitted along with data through PoE technology.
|Other PoE-enabled devices such as RFID readers, access controls, thin clients, alarms or sensors, benefits with easy and cost saving installation even when it is away from AC outlets.
Complies with IEEE 802.3af (PoE), IEEE 802.3at (PoE+) and IEEE 802.3bt (PoE++) Standards and supports PoE PD (Power Device) up to 60W.
|1 x RJ-45 10/100/1000Base-T input ports
1 x RJ-45 10/100/1000Base-T PoE output ports
|AC Power (PWR)
|100-240V AC, 50-60Hz, 1.5A
|73(W) x 154(D) x 36(H)mm
|POWER OVER ETHERNET
|IEEE 802.3af (PoE)
IEEE 802.3at (PoE+)
IEEE 802.3bt (PoE++)
|DC 54V/1.67A, up to 60W
|1/2, 3/6 for IEEE 802.3at/af
1/2, 3/6 and 4/5, 7/8 for IEEE 802.3bt 60W PoE++ power
|Short Circuit Protection
|Over Circuit Protection
|PoE PD Auto Detection
|IEEE 802.3 10BaseT Ethernet
IEEE 802.3u 100BaseTX Fast Ethernet
IEEE 802.3ab 1000BaseT Gigabit Ethernet
IEEE 802.3af Power Over Ethernet (PoE)
IEEE 802.3at Power Over Ethernet Plus (PoE+)
IEEE 802.3bt 4-Pair Power Over Ethernet Type 3
|Operating Temperature: 32~104°F (0~40°C)
Storage Temperature: -4~158°F (-20~70°C)
Operating Humidity: 10~90% (NonCondensing)
Storage Humidity: 5~90% (NonCondensing)
Quick Installation Guide