Wireless 802.11b/g Access Point with 5 Ports 10/100M Switch
  • Complies with the IEEE 802.11g/b Standards
  • Supports AP, Station, Bridge, WDS and Universal Repeater Modes
  • Supports WEP, WPA and WPA2 Encryption
  • Supports Radius Server with EAP-MD5 Authentication
  • Detachable RPSMA Antenna
  • Built-in 5-port 10/100Mbps Switch


IEEE 802.11g/b Wireless LAN Access Point
EW-7209APg is a bridge between the wired Ethernet and the IEEE 802.11g/b wireless network. EW-7209APg lets your wireless client stations to access both the wired and the wireless network nodes.

WDS Bridge Mode (Repeater Mode)
The WDS (Wireless Distributed System) function lets EW-7209APg act as a wireless access point and repeater (with other WDS support devices) at the same time. Users can use this feature to build up a wireless network for a large space like airports, hotels and schools …etc. This feature is also useful when users want to bridge networks between buildings where it is impossible to deploy network cable connections between these buildings.

Universal Repeater Mode
When enable Universal Repeater Mode, EW-7209APg acts as a wireless access point and AP client at the same time. It uses AP client function to connect to a Root AP (any AP) and uses AP function to service all wireless stations within its coverage. All the stations within the coverage of EW-7209APg can be bridged to the Root AP. Universal Repeater Mode is a very convenient way to extend the coverage of your wireless network.

Station Mode (AP Client Mode)
You can connect EW-7209APg to a network device's Ethernet port  and enable Station mode. It turn easily this wired network device to a wireless one without changing any configuration.
Robust Wireless Security
Beside the basic security settings like ESSID and 64/128-bit WEP encryption, EW-7209APg also supports the advanced security features, like WPA, WPA2, MAC access control and hidden ESSID. With other Edimax adapters, we provide a total solution to build up a secured wireless network environment to prevent from all kinds of hacker intrusion.
RP-SMA Detachable Antenna
EW-7209APg provides a standard RP-SMA antenna connector . You connect with any RP-SMA high gain aerial to extend the wireless LAN coverage and improve the performance.
Built-in 5-Port 10/100Mbps Switch
EW-7209APg builds in 5-port 10/100Mbps switch. You don't need a separate switch when you plan to connect the wired and wireless network. EW-7209APg saves the cost and makes the network easy.

Web Configuration
You can configure this access point through the friendly Web user interface with a browser.

Specifications EW-7209APg
Realtek RTL8186
RF Module
Realtek RTL8285
LAN Ports
10/100M UTP Port x 5
RP-SMA Detachable Antenna
12V DC, 1A Linear Power Adaptor
30(H)*187(W)*100(D) mm
10~90% (Non-Condensing)
FCC Class B, CE Mark, C-Tick
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.