High Power Wireless 150Mbps Outdoor Range Extender/Access Point

EW-7303HPn

  • Complies with the IEEE 802.11b/g and IEEE802.11n standards.
  • Supports 2.4000~2.4835GHz frequency band.
  • High data rate up to 150Mbps network speed.
  • Auto rate fallback in case of obstacles or interferences.
  • Supports point to point and point to multi-point bridge function.
  • Supports WDS (Wireless Distributed System) repeater mode.
  • Supports AP Client mode.
  • Supports WEP, WPA, WPA2, AE2, 802.1x authentication. 
  • Supports WPS (Wi-Fi Protected Setup) function.
  • Supports web-based configuration.
  • Firmware upgradeable via web browser.
  • Supports Low Noise Amplifier (LNA).
  • Supports operation modes: Gateway, Bridge and Wireless ISP.
  • Supports VPN pass through for PPPoE, PPTP and L2TP connections.
​(For Middle East Only)
Share


High Power Solution Boosts Coverage and Signal Strength
The Edimax EW-7303HPn is a high speed wireless broadband range extender/access point that complies with wireless IEEE 802.11b/g/n standards and features a high power design which provides wireless output power of up to 600mW. With such fine-tuned high performance*, the EW-7303HPn is truly the best choice for a cost-effective, long distance data transfer solution.

Multiple Operation Modes
The EW-7303HPn Outdoor Range Extender/Access Point can be configured to operate in four modes: Access Point (AP), Client Mode, Wireless Distribution System (WDS) with AP, or pure WDS. These settings provide versatile solutions to a wide range of wireless applications.

Outstanding Antenna Design
Edimax understand that the performance of outdoor solution relies heavily on the antenna design. Edimax developed the 9 dBi directional panel antenna in collaboration with a renowned Taiwanese high-tech college, using the latest technology in the wireless field and vast industrial experience. The fine-tuned antenna not only increases the transmission range but also stabilizes wireless signals - providing the highest quality for long distance data transfer applications.

Easy InstallationIn addition to multiple operating modes, a robust and slim design ensures that the EW-7303HPn can be installed on a wall or pole in any location. Its light weight makes it ideal for almost any conditions or circumstances and installation is simple - there is no need for professional help or knowledge to set up the EW-7303HPn.

Web Configuration
The access point/extender can be configured extensively through the user friendly web browser interface.
 

Share


SPECIFICATIONS

Product

High Power Wireless 150Mbps Outdoor  Range Extender/Access Point

Frequency Band

2.4GHz~2.484GHz

Flash

2 MB NOR Flash

RAM

8 MB SDRAM

LAN Port

10/100M Passive PoE Port x 1

Antenna

Internal Directional 9 dBi panel antenna

Output Power

11n:  24±1dBm, -89dBm
11g : 26±1dBm, -91dBm
11b  :28±1dBm, -93dBm

Power

12VDC, 1A Single Range Switching Power Adapter

Dimension

225(H) x 77(W) x 59(D) mm

Temperature

Operating: 0~60 ℃

Humidity

Operating: 10~90% (Non-Condensing)
Storage: Max. 95% (Non-Condensing)

Certification

FCC

 

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.