N150 Wireless Outdoor Range Extender/Access Point with Built-in 12dBi Antenna

EW-7303APn V2

  • Complies with wireless 802.11b/g/n standards
  • Built-in 12dBi antenna (transmission range over 1km*)
  • Wireless data rates up to 150Mbps
  • Supports AP mode, WDS mode, WDS with AP mode, and repeater mode
  • Supports WEP, WPA, WPA2, and IEEE 802.1x encryption


Enhanced Coverage and Signal Strength
The Edimax EW-7303APn V2 is an outdoor range extender/access point that complies with wireless 802.11b/g/n standards and features a high quality design which provides a Wi-Fi coverage range of over 1 kilometer*. A combination of cost-effectiveness and outstanding wireless performance make the EW-7303APn V2 the leading choice for long distance wireless connectivity.

12dBi High-Gain Antenna
The outstanding high power performance of the EW-7303APn V2 is complimented by a built-in 12dBi directional panel antenna. This high-gain antenna not only increases the transmission distance, but also stabilizes the wireless signal for superb wireless performance. Additionally, the EW-7303APn V2 is designed with an SMA connector that enables the user to connect external antennas to the range extender/access point. Users can boost the transmission distance even further with a high dBi antenna or set up a Wi-Fi central station with an omni-directional antenna.

Multiple Operation Modes
The Edimax EW-7303APn V2 can be configured to operate in four modes: AP mode, WDS mode, WDS with AP mode, and repeater mode. With multiple operation modes, the EW-7303APn V2 is a versatile solution perfect for a wide range of wireless applications.

Wireless 802.11n Standard (Data Rates up to 150Mbps)
The Edimax EW-7303APn V2 is a high-speed solution that complies with IEEE 802.11b/g/n standards. The latest wireless technology is built-in to broaden wireless coverage and reduce dead spots within the wireless range. When connected to wireless 802.11n compatible devices, the EW-7303APn V2 can achieve transmission rates of up to 150Mbps.



Features

  • Complies with IEEE 802.11b/g/n standards
  • Supports 2.4000 to 2.4835GHz frequency bands
  • Network data rates up to 150Mbps
  • Auto rate fallback in cases of interference
  • Features WDS (Wireless Distribution System) repeater mode
  • Supports WDS with AP mode
  • Supports WEP, WPA, WPA2, AE2, 802.1x authentication
  • Features WPS (Wi-Fi Protected Setup)
  • Web-based configuration interface
  • Firmware upgradable
  • Features LNA (Low Noise Amplifier)
  • Supports gateway, bridge and WISP operation modes
  • Supports VPN pass-through for PPTP, IPsec, and L2TP connections

 



SPECIFICATIONS

Product

150Mbps Wireless Outdoor Range Extender/Access Point with Built-in 12dBi Antenna

Frequency Bands

2.4 - 2.484GHz

Flash

4MB NOR Flash

RAM

32MB SDRAM

LAN Port

10/100M Passive PoE Port x 1

Antenna

Internal: 12dBi directional panel antenna
External (optional): SMA connector

Output Power

11n: 15±1dBm, -71dBm

11g: 17±1dBm, -75dBm

11b: 19±1dBm, -89dBm

Power

12V DC, 1A

Dimensions

225 (H) x 77 (W) x 59 (D) mm

Weight

250 g (8.82oz)

Temperature

Operating: -20 to 70°C

Humidity

Operating: 10-90% (non-condensing)
Storage: Max. 95% (non-condensing)

Certification

FCC, CE

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.