Upset that your wireless can’t reach certain areas in your house? Powerline Wireless Extender is an ideal and simple solution for you. Edimax’s HP-5101Wn AV500 Powerline Wireless Extender creates a 500Mbps high-speed network with standard power outlets and converts wired Ethernet network and Powerline network into wireless which extends your internet access anytime anywhere in the house without internet dead spot and no more messy wires running through your house.
HP-5101Wn Powerline Wireless Extender is perfect for high-bandwidth applications like HD video and audio streaming, and it's compatible with any networking Ethernet-enable devices. HP-5101Wn expands your network to the locations wireless cannot, so it is ideal for computers, home theater, smart TVs and gaming devices. It provides you an expandable and easy to set up network at home.
The HP-5101Wn is a 500Mbps Powerline adapter and a 300Mbps 802.11n wireless. Extend an Internet connection to any room via your home’s electrical circuit and create a high speed 802.11n wireless at any power socket. The HP-5101Wn offers easy, plug-and-play setup and provides super-fast Wi-Fi coverage – enough for even the most demanding applications, along with excellent range across large homes or through walls and floors. Ideal for keeping smart phones, tablets and laptops connected to high-speed Wi-Fi anywhere in your home.
A perfect solution for bandwidth intensive applications such as online gaming or HD videos, the HP-5101Wn can provide users with a stable high-speed data transmission rates of up to 500Mbps over the existing electrical wires. IGMP multicast support ensures high-performance and efficient use of network resources for streaming high-definition video and digital audio quickly and easily.
Powerline adapters are designed with ease-of-use and user-friendliness in mind. There is no need to install any additional software and your Powerline network and be up-and-running within just a few minutes. A secure Powerline connection can be established between compatible devices with a simple touch of a button, with no configuration or passwords necessary.
The HP-5101Wn supports the energy saving mode to reduce power consumption. If no data transmission or reception occurs over a certain period of time, the adapter will automatically go into standby mode to save power consumption.
*Powerline adapters must be deployed in sets of two or more.
*500Mbps is the maximum theoretical communication speed at the physical layer via electric power lines (i.e. speed between Powerline devices) based on the IEEE 1901 standard.
|Interface||1 x AC plug
1 x RJ45 10/100Mbps LAN port
|LED Indicator||Wireless, WPS, Ethernet, Powerline, Power|
|Button||1 x Group button
1 x WPS/Reset button
|Antenna||2 x Antenna (external)|
|Power Supply||100-240V AC, 50-60Hz|
|Dimensions||87 x 59 x 30mm (without plug)|
|NETWORK & SYSTEM|
|Frequency||2MHz~68MHz (with Mask)|
|Modulation Schemes||OFDM symbol modulation on line synchronization 1024/ 256/ 64/ 16/ 8-QAM, QPSK, BPSK, ROBO modulation|
|Data Rate||TCP: Up to 95 Mbps effective throughput
UDP: Up to 95 Mbps effective throughput
Powerline: 500Mbps (PHY rate)
|Operating Range||Up to 300 meters over a home's electrical circuit|
|QoS||4 levels priority based contention access, and multi segment bursting
8 levels VLAN priority field, TOS field
QoS classification by destination MAC address and IP port
|Nodes||Up to 15 slaves with 1 master, 16 total devices
Max 8 bridged devices per station
|IGMP||Support for IPv4/IGMPv1,v2,v3 snooping
Support for IPv6 and MLDv1, v2 snooping
Max 16 source addresses and group members
|Security||128-bit AES link encryption with key management
WEP/WPA/WPA encryption for wireless
|Wireless Frequency & Modulation||2400–2483.5MHz
802.11b: CCK, DQPSK, DBPSK
802.11g: 64QAM, 16QAM, QPSK, BPSK, DSSS
802.11n: 64QAM, 16QAM, QPSK, BPSK
|Wireless Features||Support auto channeling
Legacy and high throughput modes
Support 64/128-bit WEP, 802.1x, WPA, and WPA2 for wireless security
Multiple BSSID support