Fast Ethernet 3 Parallel port Print Server


( End-of-Life Product, no longer supported by Edimax tech support ) 
Please find all information available below.

  • Multiple Network Protocols – TCP/IP, NetBEUI and IPX  
  • Multiple Network Environment – Windows Peer-to-Peer, Windows Server, Netware and Linux
  • Multiple Platform – Windows 95/98/Me/NT/2000, DOS, Unix and Linux
  • Web-Based Management  
  • Supports DHCP Server/Client, Auto-detection  
  • Supports Bi-Directional & Fault-Tolerant Upgrade

Easy Installation and Configuration (Web-Based)
The print server's easy-to-use windows installation wizard allow for quick installation and setup. The print server can also be conveniently configured from any network client that support web-browsing.
Supports both Peer-to-Peer and Server-based printing
LAN clients can connect directly with the print server to execute printing jobs (Peer-to-Peer printing); or clients can send print jobs first to a server (queuing jobs) and allow the server to connect with the print server to execute the printing jobs (Server-based printing).
Supports Windows 95/98/Me/NT/2000/XP, NetWare (3.x above) and Unix/Linux environments
The print server and its drivers are compatible with all major operating systems used today
Supports DHCP Server/Client
The printer server can act as a DHCP server, allowing your LAN clients to automatically obtain an IP address or it can act as a DHCP client allowing for easy integration to your existing network
Fault-Tolerant Firmware Upgrades
Users need not worry about errors occuring in the midst of an upgrade, thus preventing the printer server from operating. The print server's fault-tolerant upgrade function allows for re-upgrades should problems occur during the initial upgrade.


  • Provides one 10/100Mbps auto-sensing port that complies with IEEE 802.3 and 802.3u standards
  • Provides three Printer Ports
  • Supports TCP/IP, IPX/SPX, NetBEUI network protocols
  • Supports LPR, Email Printing, Raw Printing, Unix Logical Printer 
  • Supports Peer-to-Peer Printing (TCP/IP/IPX/NetBEUI) 
  • Supports Server-based printing (Novell NetWare and Windows)
  • Compatible with all major operating systems (Windows 95/98/Me/NT/2000/XP, NetWare (3.x above) and Unix/Linux)
  • Supports DHCP (both client and server) protocol 
  • Efficient print job transfer using DMA (Direct Memory Access).
  • Supports bi-directional capability, able to get information from printers
  • Supports Web-based management, Windows Configuration Utility, SNMP Protocol
  • Provides easy-to-use installation, setup and diagnostic programs.
  • Provides flash memory for convenient software upgrades. 
  • Supports Fault-Tolerant Upgrade capability

  • Standards : IEEE-802.3 IEEE 802.3u
  • Printer Port : DB-25 x 3
  • LAN Port : 10/100M UTP (RJ45) x 1
  • Power Adapter : 12VDC / 1A
  • Dimensions :  30(H) x 220(W) x 117(D) mm (PS-3101); 32(H) x 187(W) x 105(D) mm (PS-3101P)
  • Weight : 785g (PS-3101), 260g (PS-3101P)
  • Temperature:10-55 °C
  • Humidity:0-90%(Non-condensing)
  • Certification : FCC Class B CE Mark C-Tick
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.