IEEE-802.11g Wireless LAN Range Extender / Access Point + 5 Ports 10/100M Switch


  • Complies with the IEEE 802.11g/b Standards
  • Supports AP, Station, Bridge, WDS and Universal Repeater Modes
  • Supports WEP, WPA and WPA2 Encryption
  • Supports Radius Server with EAP-MD5 Authentication
  • Detachable RPSMA Antenna
  • Built-in 5-port 10/100Mbps Switch
(For Middle East Only)


*Important Notice: The AP Wizard V1.0 only works with EW-7206APg F/W version V1.31 and above.
*Wizard supports windows 7.

IEEE 802.11g/b Wireless LAN Access Point
Acting as a bridge between the wired Ethernet and the 2.4GHz IEEE 802.11g/b wireless LAN, this wireless LAN access point can let your wireless LAN client stations access both the wired and the wireless network nodes.

Universal Repeater Mode
The Universal Repeater function can extend the coverage and signal strength for the current wireless environment. It is compatible with other wireless APs and Routers. Users can use this feature to build up a large wireless network in a huge space like airports, hotels and schools…etc.

Station Mode (AP Client Mode)
You can connect EW-7209APg to a network device's Ethernet port  and enable Station mode. It turn easily this wired network device to a wireless one without changing any configuration.

Robust Wireless Security
Beside the basic security control by ESSID and 64/128 bit key length WEP encryption, this access point also supports the advanced security features, like MAC access control, IEEE 802.1x authentication, TKIP, AES  and hidden ESSID. It provides a total solution for you to build up a secure wireless network environment that can prevent from hacker intrusion.

Built-in 5-Port 10/100Mbps Switch
EW-7209APg builds in 5-port 10/100Mbps switch. You don't need a separate switch when you plan to connect the wired and wireless network. EW-7209APg saves the cost and makes the network easy.

Web Configuration
You can configure this access point through the friendly Web user interface with a browser.


  •  Complies with the IEEE 802.11g/b 2.4GHz specification
  •  Supports 2.400~2.4835 GHz frequency band, 1~14 channels
  •  High data rate up to 54Mbps network speed
  •  Auto rate fallback in case of obstacles or interferences
  •  Supports point-to-point and point-to-multi point bridge function
  •  Supports WDS (Wireless Distributed System) repeater mode
  •  Supports roaming link integrity
  •  Supports authentication for wireless connectivity based on ESSID
  •  Provides 64/128 bit key length WEP data encryption
  •  Supports WPA, WPA2 security enhanced function (pre-shared key, 802.1x, TKIP, AES …)
  •  Provides MAC access control and hidden SSID function
  •  Provides RADIUS server with EAP-MD5/PEAP authentication function
  •  Provides DHCP server
  •  Supports Web-based configuration, firmware upgradeable via Web
  •  Provides RP-SMA detachable antenna that can be easily replaced by an high-gain outdoor antenna





• Connect the access point to ADSL modem, router, or switch/hub in your network through the LAN port of the access point by Ethernet cable.
• Connect a computer to the LAN port and setup the Internet connection by running the multi-language setup wizard.
• Connect wireless devices to EW-7209APg.

  • RP-SMA Detachable Antenna
  • Reset button
  • LED indicators: Power, LAN Link/Activity, Wireless Activity
  • CPU: Realtek RTL8186
  • Switch: Realtek RTL8305SC (5 Port Switch)
  • RF: Realtek RTL8225
  • 12V DC, 0.4A Switch Power Adaptor
  • 18dBm
  • Quick installation Guide
  • 2 MB NOR Flash
  • 16 MB SDRAM
  • 64/128-bit WEP, WPA and WPA2
  • MAC Filter
  • 10/100M UTP Port x 1
  • Max. 10~90% (Non Condensing)
  • 10 ~40°C
  • Windows 95/98/ME/2000/XP/Vista
  • 30(H) x 187(W) x 100(D) mm
  • FCC, CE



*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.