N300 Wireless Broadband Router

BR-6428nS +9dBi

  • Complies with wireless 802.11b/g/n standards with high-speed data rate up to 300Mbps
  • 2 detachable 9dBi high gain antennas to enhance the wireless range and coverage
  • Support Wireless Internet Service Provide (WISP) conneciton mode to share Wi-Fi service for multiple users
  • Multiple 5-in-1 AP/ AP client/ bridge/ WDS/ repeater modes
  • Built-in hardware WPS (Wi-Fi Protected Setup) button for easy one-click setup
Share


To provide home and office users who need wider wireless coverage, the Edimax BR-6428nS +9dBi  N300 Wireless Router employs 2 high gain detachable 9dBi antennas to enhance the wireless range and coverage. BR-6428nS +9dBi is a high performance yet cost-effective wireless N device provides an exceptional and advanced wireless performance.  


300Mbps Wireless 802.11n Standard
The BR-6428nS +9dBi is a high-speed Wi-Fi solution which supports IEEE 802.11b/g/n standards, and the detachable 9dBi antennas provide significantly improved coverage. When connected to other 802.11n devices, the BR-6428nS +9dBi can achieve transmission rates of up to 300Mbps, making it  ideal for streaming HD video and online gaming. Impressive performance and a competitive price make the BR-6428nS +9dBi a cost-effective solution for any home or small business environment.
 

BR-6428nS+9dBi_wider_range_coverage.jpg
 

 


 




 

Green Technology
Designed with the latest green technology, the BR-6428nS +9dBi dynamically adjusts the power supply according to the amount of wireless transference, using up to 66% less power than usual while still ensuring the highest standard of wireless performance.
 

BR-6428nS+9dBi green technology for power-saving up to 66%
 


 


 


Wireless Internet Service Provider (WISP) Connection Mode
With WISP support, the BR-6428nS +9dBi is able to share an Internet connection from a wireless ISP access point and convert it into a wired or wireless network for multiple users in your home or office.
 

BR-6428nS+9dBi_WISP-share-WiFi-to-multiple-users.jpg

 


 


 


Wi-Fi Protected Setup (WPS) Button
The BR-6428nS +9dBi has a one-click Wi-Fi Protected Setup (WPS) button to help you set up and activate a secure wireless network in a snap.
 

BR-6428nS+9dBi_WPS.jpg

​


 


 



APPLICATION DIAGRAM

BR-6428nS+9dBi_application_diagram.jpg

Share


SPECIFICATIONS

​

FUNCTIONS

HARDWARE INTERFACE

MANAGEMENT

•Supports AP, AP client, bridge, WDS and repeater modes
•Port Triggering for special applications
•DDNS and SIP
•Virtual server and DMZ hosting
•MAC/IP filter and URL blocking
•Static routing
•UPnP architecture
VPN pass-through (IPSec/PPTP)
Schedule control

•1 x RJ-45 WAN port
•4 x RJ-45 Fast Ethernet LAN port
•LED Indicators: power, wireless, WAN, LNK/ACT for LAN
•2 x 9dBi detachable antennas
•WPS/Reset button
•Wireless on/off switch

•Intuitive user interface
•System status and security log (web interface)
•Firmware upgradeable

WAN

SECURITY

OUTPUT POWER & RECEIVE SENSITIVITY

•Supports WISP connection mode
•Supports RJ-45 cable/xDSL modems
•WAN protocol: PPPoE, static IP, dynamic IP, PPTP and L2TP

•NAT/NAPT IP sharing
•64/128-bit WEP encryption and WPA-PSK, WPA2-PSK security
•DHCP server/client
•QoS for critical operations
•SPI anti-DoS firewall

•11n: 16±1dBm,
  11g: 16±1dBm,
  11b: 18±1dBm
•11n (40MHz): -68dBm,
  11n (20MHz): -71dBm,
  11g: -74dBm,
  11b: -87dBm

MEMORY

HUMIDITY & TEMPERATURE

CERTIFICATIONS

•2MB NOR Flash
•16MB RAM

•10-90% (non-condensing)
•0-45oC

•CE, FCC

POWER ADAPTER

DIMENSIONS

 

•DC 5V, 1A

•135(W)mm x 100(D)mm x 28(H)mm
•Antenna: 385mm

 
 


​HARDWARE INTERFACE

BR-6428nS+9dBi_Hardware_Interface.jpg​

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.