The Edimax ES-5208P is a web-smart switch with 8 Fast Ethernet PoE+ ports and 2 Gigabit Combo ports. It easily connects and supplies power to PoE-enabled devices such as wireless access points, network cameras and IP phones as well as other Ethernet-enabled devices such as computers, printers and network attached storage (NAS).  ES-5208P is designed with easy management, all configuration can be performed through an intuitive browser-based Graphical User Interface. Ideal for small or medium network environments to strengthen the network connection, its standard 13-inch rack-mount brackets allow for integration with the most widely used mounting systems on the market.

 

IEEE 802.3at Power over Ethernet (PoE+) Auto Detection

The ES-5208P features 8 IEEE 802.3at Power over Ethernet (PoE+) ports that supply up to 30 watts of electricity per port. It can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The ES-5208P features PoE+ device detection to verify whether individual, connected devices are IEEE 802.3at compliant or not, so only data will be sent via the LAN cable if the device is not a PoE or PE device. Various PoE products such as Access Points, IP cameras or IP phones are easily connected to the switch, making it the perfect solution when power outlets are difficult to install or existing power outlets are too far from devices.

Cost-Effective, No Special Networking Cable Required

Reduce your installation time and cost by using a standard Cat-5e Ethernet cable to link between the ES-5208P switch and powered devices (PD). The Ethernet cable will then transmit both data and power, so you won't need all those extra power cables to your powered devices (PD).

Smart Features Supported

The ES-5208P Web smart features can be managed through a Web Browser. The smart features include simple QoS/CoS applications and basic monitoring tools to improve network efficiency. The ES-5208P also supports bandwidth control and port based VLAN. Through a Web interface, an administrator can set up VLANs to segregate traffic and QoS to prioritize mission-critical data. All of these features offer extra protection on the network edge. Best of all, the password-protected configuration interface can be accessed remotely. It increases the IT manager‘s mobility.

High Performance

The ES-5208P switch also supports auto-negotiation and non-blocking wire speed to give you the maximum speed and highest performance possible for each device connected to your network.

• Auto-Negotiation

• Non-Blocking Wire Speed

Power Saving

Along with the Fast Ethernet speeds critical for next-generation network applications, the ES-5208P offers environmental efficiency . To comply with the IEEE802.3az standard, the ES-5208P provides power saving functionality to reduce energy consumption and save costs:

• Inactive Link Detection

• Cable Length Detection

SPECIFICATIONS
 

HARDWARE
Ports	8 RJ-45 10/100Base-TX PoE+ ports 2 Combo Gigabit Ethernet/SFP ports
Transmission Method	Store and forward
Transmission Media	10BaseT Cat. 3, 4, 5 UTP/STP 100BaseTX Cat. 5 UTP/STP 1000BaseT Cat. 5e UTP/STP
Buttons	Reset button
LED Indicators	Per port: Link/Act, PoE Per unit: Power, system
Power Input	100-240V AC, 50-60 Hz
Power Consumption	160W (Max)
Dimensions (L x W x H)	330 × 230 × 44 mm
Weight	2.3KG
PERFORMANCE
Switching Capacity	2.8Gbps
MAC Address	4K
Buffer Memory	352KB
Jumbo Frames	1536Bytes
Filtering/Forwarding Rates	1000Mbps port – 1,488,000pps 100Mbps port - 148,800pps 10Mbps port - 14,880pps
POWER OVER ETHERNET
Standard	IEEE 802.3af, IEEE 802.3at
Power Output	Up to 30W per port
Pin Assignment	1/2(+), 3/6(-) (End span)
Available Power Budget	130W (Max)
SMART FEATURES
VLAN	Up to 140 VLANs and 4096 VLAN IDs 802.1Q tag-based VLAN Port-based VLAN Management VLAN
Port Trunking	IEEE 802.3ad LACP Trunk-static trunk up to 3 trunk groups
IGMP Snooping	IGMP v1/v2 snooping IGMP Snooping queries Block unknown multicast traffic Multicast groups: 256
QoS	Port-based QoS, IEEE802.1p QoS, 4 priority queues, scheduling algorithm
Mirror	Port mirroring both on ingress and egress traffic Many to one
Management	User interface: Web-based management User account: Login account configuration Firmware upgrade: Firmware upgrade by WEB Loop detection/prevention
Security	Rate limit: Rate limit on ingress and egress traffic Broadcast storm control
ENVIRONMENT
Temperature	Operating: 0 ~ 40℃ Storage: -40 ~ 70℃
Humidity (Non-condensing)	Operating: 10 ~ 90% Storage: 10 ~ 90%
STANDARDS COMPLIANCE
Standards	IEEE 802.3 10BaseT Ethernet IEEE 802.3u 100BaseTX Fast Ethernet IEEE 802.3ab 1000BaseT Gigabit Ethernet IEEE 802.3z 1000BaseSX/LX IEEE 802.3af Power Over Ethernet (PoE) IEEE 802.3at Power Over Ethernet Plus (PoE+) IEEE 802.3x Full-duplex and flow control IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.1Q VLAN + QoS IEEE 802.1d Spanning tree protocol IEEE 802.1w Rapid spanning tree protocol IEEE 802.1p Class of service, priority protocols
Certifications	FCC, CE

PACKAGE CONTENTS

• ES-5208P PoE+ Web Smart Switch
• Quick Installation Guide
• CD
• Power Cord
• Rack-Mount Kit

HARDWARE INTERFACE
 

​