AV500 PowerLine Wi-Fi Extender with PowerLine Adapter Kit

HP-5122WMK

  • ​Extends your home network with a stable high-speed data transmission rates of up to 500Mbps through existing electrical wires. 
  • Shares your wireless network at speeds up to 300Mbps. (HP-5102Wn only)
  • Backward compatible with 200Mbps Powerline adapters.
  • Features energy saving mode to reduce power consumption.
  • Range up to 300 meters via electrical wiring for better performance through walls or floors.
  • Plug-n-play setup - no wires, configuration or software required.
  • Wi-Fi Protected Setup (WPS) button for quick, secure wireless connections.


Upset that your wireless can’t reach certain areas in your house? Powerline  AV500 Power Line Wi-Fi  Extender with PowerLine Adapter Kit is an ideal and simple solution for you. Edimax’s HP-5102Wn AV500 Powerline Wi-Fi Extender and HP-5102 AV500 Powerline adapter create a 500Mbps high-speed network with standard power outlets and converts wired Ethernet network and Powerline network into wireless which extends your internet access anytime anywhere in the house without internet dead spot and no more messy wires running through your house. 

HP-5122WMK Powerline  Wi-Fi  Extender with Powerline Adapter kit is perfect for high-bandwidth applications like HD video and audio streaming, and it's compatible with any networking Ethernet-enable devices. HP-5102Wn expands your network to the locations wireless cannot, so it is ideal for computers, home theater, smart TVs and gaming devices.  It provides you an expandable and easy to set up network at home.


Transmit Network Data via Existing Electrical Wires
The Edimax HP-5122WMK transforms the existing electrical wires in your home or office into a high-speed network. Complicated, disruptive and unsightly cabling is no longer necessary - if your home or office doesn’t have an existing Ethernet cable infrastructure, the HP-5122WMK enables you to create a network environment easily and cost-effectively.


Extend Your Home Network With High-Speed 300Mbps Wireless N Coverage 
The HP-5102Wn is a 500Mbps Powerline adapter and a 300Mbps 802.11n wireless. Extend an Internet connection to any room via your home’s electrical circuit and create a high speed 802.11n wireless at any power socket. The HP-5102Wn offers easy, plug-and-play setup and provides super-fast Wi-Fi coverage – enough for even the most demanding applications, along with excellent range across large homes or through walls and floors. Ideal for keeping smart phones, tablets and laptops connected to high-speed Wi-Fi anywhere in your home.


Great for HD Video and Gaming
A perfect solution for bandwidth intensive applications such as online gaming or HD videos, the HP-5122WMK can provide users with a stable high-speed data transmission rates of up to 500Mbps over the existing electrical wires. IGMP mulitcast support ensures high-performance and efficient use of network resources for streaming high-definition video and digital audio quickly and easily.


User-Friendly Setup
Powerline adapters are designed with ease-of-use and user-friendliness in mind. There is no need to install any additional software and your Powerline network and be up-and-running within just a few minutes. A secure Powerline connection can be established between compatible devices with a simple touch of a button, with no configuration or passwords necessary.


Energy Saving
The HP-5122WMK supports the energy saving mode to reduce power consumption.  If no data transmission or reception occurs over a certain period of time, the adapter will automatically go into standby mode to save power consumption.

 


APPLICATION DIAGRAM
 
Edimax Powerline Wi-Fi Extender & Powerline Adapter Kit, HP-5122WMK including 1x HP-5102Wm & 1x HP-5102
​*Powerline adapters must be deployed in sets of two or more.


HP-5122WMK includes 1 unit HP-5102Wn & 1 unit HP-5102

*500/200Mbps is the maximum theoretical communication speed at the physical layer via electric power lines (i.e. speed between Powerline devices) based on the IEEE 1901 standard.



SPECIFICATIONS (HP-5102Wn)

Hardware

Standards

Effect Data Rate

•1 x AC plug (UK or AU)
•1 x 10/100Mbps Ethernet LAN port
•1 x Reset/
Group button
•1 x WPS button
•LED indicators: power, Powerline, Ethernet, wireless

•2 x Antenna (internal)

•IEEE 802.11b/g/n
•IEEE 1901
•IEEE 802.3/IEEE 802.3u

•TCP: Up to 95 Mbps effective throughput
•UDP: Up to 95 Mbps effective throughput
•Powerline: 500Mbps (PHY rate)

Powerline Frequency Band

Modulation Schemes

Powerline Operating Range

•2-68MHz (with Mask)

•OFDM symbol modulation on line synchronization 1024/256/64/16/8-QAM, QPSK, BPSK, ROBO modulation

•Up to 300 meters

QoS

Nodes

IGMP

•4 levels priority based contention access, and multi segment bursting
•8 levels VLAN priority field, TOS field
•QoS classification by destination MAC address and IP port

•Up to 15 slaves with 1 master, 16 total devices
•Max 8 bridged devices per station

•Support for IPv4/IGMPv1,v2,v3 snooping
•Support for IPv6 and MLDv1, v2 snooping

Memory

Security

 Temperature & Humidity

•2MB Flash
•8MB SDRAM

•128-bit AES link encryption with key management
•WEP/WPA/WPA encryption for wireless

•0-45 degrees Celsius
•10-90% (non-condensing)

Wireless Frequency & Modulation

Wireless Output Power

 Wireless Features

•2400–2483.5MHz
•802.11b: CCK, DQPSK, DBPSK
•802.11g: 64QAM, 16QAM, QPSK, BPSK, DSSS
•802.11n: 64QAM, 16QAM, QPSK, BPSK

•11n: HT20
          MCS0: 16dB, MCS7: 12dB
         HT40
          MCS0: 15dB, MCS7: 12dB
•11g: 6M: 17dB, 54: 13.5dB
•11b: 1M: 17dB, 11M: 17dB

•Support auto channeling
•20MHz/40MHz Bandwidth
•Support 64/128-bit WEP, WPA, and WPA2 for wireless security

Power Source / Power Consumption

Dimensions & Weight

 Certification

•100-240V AC, 50-60Hz
•4W

•82 x 53 x 42mm (without plug)
•125g

•CE


 

SPECIFICATIONS (HP-5102)

Hardware

Standards

Effect Data Rate

•1 x AC plug (EU, UK, US or AU)
•1 x 10/100Mbps Ethernet LAN port
•1 x Group/Reset button
•LED indicators: power, Ethernet, Powerline

•IEEE 1901
•IEEE 802.3
•IEEE 802.3u

•TCP: Up to 95 Mbps effective throughput
•UDP: Up to 95 Mbps effective throughput

•Powerline: 500Mbps (PHY rate)

Frequency Band

Modulation Schemes

Operating Range

•2-68MHz (with Mask)

•OFDM symbol modulation on line synchronization 1024/256/64/16/8-QAM, QPSK, BPSK, ROBO modulation

•Up to 300 meters

QoS

Nodes

IGMP

•4 levels priority based contention access, and multi segment bursting
•8 levels VLAN priority field, TOS field
•QoS classification by destination MAC address and IP port

•Up to 15 slaves with 1 master, 16 total devices
•Max 8 bridged devices per station

•Support for IPv4/IGMPv1,v2,v3 snooping
•Support for IPv6 and MLDv1, v2 snooping
•Max 16 source addresses and group members

Memory

Security

 Temperature & Humidity

•1MB Flash
•8MB SDRAM

•128-bit AES link encryption with key management

•0-45 degrees Celsius
•10-90% (non-condensing)

Power Source & Power Consumption

Dimensions & Weight

 Certifications

•100-240V AC, 50-60Hz
•4W

•67 x 50 x 32mm
•109
g

•CE, FCC LVD




PACKAGE CONTENTS
 
  • Powerline adapter x 2 (HP-5102Wn x 1 & HP-5102 x 1)
  • Quick installation guide x 1
  • CD with setup wizard, user manual & multi-language QIG x 1
  • Ethernet cable x 2


HARDWARE INTERFACE
HP-5102Wn_hardward_interface AV500 PowerLine Wi-Fi Extender
Edimax HP-5102AC 500Mbps Nano PowerLine Adapter with Group Setting Button
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.