200Mbps PowerLine Ethernet Adapter

HP-2002AV

  • Complies with 200Mbps Powerline AV200 and IEEE 802.3 / 802.3u standards
  • Uses the electrical wire to transmit data like an Ethernet network
  • Supports 128-bit AES link encryption to secure Powerline data transmission
  • Supports IGMP , QoS , hardware security button and reset button
  • Easy installation and transmission ranges up to 300 meters
(For Middle East Only)


USE THE EXISTING POWER LINE
HP-2002AV turns the existing electric wires in your home or office into a high-speed network. You do not have to install the network cables  and be annoyed with the cables planning-- just use the wires that already run through the building! HP-2002AV enables you to create a network easily and cost-effectively.

SUPPORTS IGMP & 200MBPS POWERLINE AV200 STANDARD
HP-2002AV not only complies with the Powerline AV200 standard but also supports IGMP managed multicast session. Powerline AV200 represents the next generation of technology which providing high speed 200Mbps data rate and coverage range up to 300 meters. IGMP can be used for online streaming video and gaming, and allows more efficient use of resources. With IGMP multicast, HP-2001AV can save the bandwidth of powerline . People will be able to transfer high-definition video and digital audio by simply connecting the device to an electrical outlet.

SUPPORT QoS &128-BITS AES ENCRYPTION

HP-2002AV not only provides Quality of Service ( QoS ) guarantees including guaranteed bandwidth reservation, high reliability and tight control of latency, but also supports 128-bits AES link encryption for security. It is a good choice for you to create a new network or to rearrange of the existing network.

SUPPORT GROUP BUTTON & RESET BUTTON
HP-2002AV provides hardware “Group Button” and “ Reset Button” for you to simplify the configuration. The “Group Button” can help you to setup network password of powerline automatically. Press the “Reset Button” for 3 seconds to reset the configuration to factory default.

 

 






APPLICATION DIAGRAM
 

  • Plug the HP-2002AV to the power outlet and Connect the HP-2002AV to your Broadband router.
  • Plug the other HP-2002AV to the power outlet and Connect the HP-2002AV to your computer's Ethernet port .

 

 

*Powerline adapters must be deployed in sets of two or more.

200Mbps is the maximum theoretical communication speed at the physical layer via electric power lines based on the IEEE 1901 standard.



SPECIFICATIONS
HARDWARE INTERFACE MODULATION POWER
  • 1 Power jack + 1 LAN 10/100Mbps Ethernet Ports
  • LED Indicators: Power, Ethernet and Powerline
  • Reset button
  • Group button
  • 1024/256/64/16-QAM, QPSK,BPSK and ROBO Modulation Schemes
  • 100~240VAC , 50~60Hz
SECURITY & SUPPORT OS FREQUENCY BAND & HARDWARE HUMIDITY
  • 128-bit AES link Encryption
  • Support Windows 98SE/ME/2000/32&64 bit XP/32&64 bit Vista
  • 2~30 MHz
  • 128Mbits SDRAM
  • 16Mbits Flash
  • 10-90% (Non-condensing)
FUNCTIONS DIMENSION & TEMPERATURE CERTIFICATIONS
  • Powerline Coverage Range up to 300 meters
  • Supports IPv6
  • IGMP managed multicast IP transmission
  • Integrated Quality of Service ( QoS ) :
    Support contention-free access, four-level priority basedcontention access, and multi segment bursting Support VLAN Priority, ToS and CoS Packet Classifier
  • 99 x 64 x 45 mm
  • 0~45 Degree Celsius
  • CE

 

 

 

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.