200Mbps Full Duplex Transmission 
Edimax ES-3208P is a high speed fast Ethernet switch for home and small business. ES-3208P not only complies with  IEEE 802.3/802.3u 10/100Mbps Ethernet standard but also supports full duplex transmission. The full duplex feature can double the network throughput on every port. It is used for high speed server or switch-to-switch connections. The maximum throughput of every port can reach up to
200Mbps .

Supports Wire-speed and Flow Control
The ES-3208P built-in non-blocking and store-and-forward architecture feature your network with full-wire speed connections. It accommodates with flow control for full duplex mode and back pressure for half-duplex mode which ensure reliable data transfer and help to prevent data lost. Use ES-3208P to create a high-speeds network and benefit from it's ultimate performance and
reliability.

Supports Auto-MDI/MDI-X and Auto Sensing
ES-3208P supports PnP (plug and play) installation and auto-MDI/MDI-X function. You can connect ES-3208P with computers or Ethernet devices without any configuration. You also can use either straight-through or cross-over Ethernet cable and combine 10 and 100Mbps devices into ES-3208P.
The switch will automatically detect the right cable and speed for your device.

Power Saving
With new generation power saving mode, ES-3208P can reduce power consumption. It is the best solution for home and small business.

NETWORK SETUP DIAGRAM AND RELATED PRODUCTS
An example to setup ES-3208P:

• Connect the ES-3208P to your Router or cable/ xDSL modem.
• Connect a computers to ES-3208P.
• You can also connect Print Server, NAS and IP CAMERA to ES-3208P.