24-Port Fast Ethernet Management Switch with 2 Gigabit Combo Slots
ES-5226RM

(End-of-Life Product)

  • Complies with IEEE 802.3, 802.3u, 802.3ab, 802.3z standards
  • 24 Fast Ethernet RJ-45 ports and 2 gigabit RJ-45/SFP slot ports
  • IEEE 802.1D compatible and 802.1w rapid spanning tree
  • 802.1q tag-based VLAN and Q-in-Q double tag
  • IGMP snooping, IGMP fast leave, IGMP filtering, and advanced MVR
  • Supports DHCP snooping and relay agent with option 82
  • Supports SNMPv1 and SNMPv2c network management
  • Supports 802.1x port-based network access control, port mirroring, and bandwidth control



QoS with 4 Priority Queues
The QoS (Quality of Service) feature provides 8 internal queues to support 2 different classifications of traffic. High priority packet streams will experience less delay inside the switch, which provides a lower latency level for certain delay-sensitive traffic. It can classify the packet as one of the 2 priorities according to 802.1p priority tag and DSCP. The QoS operates at full wire speed, and the actual scheduling at each egress port can be based upon a strict weighted round robin.

Port Mirroring
The port mirroring feature allows the ingress traffic to execute port copying. This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data, allowing ingress traffic to be monitored by a single port that is defined as a mirror capture port. The mirror capture port can be any port. Mirroring multiple ports is possible, but can create congestion at the mirror capture port.

Q-in-Q VLAN for Improved Performance & Security
The VLAN feature in the switch offers the benefit of improved security and performance. VLAN is used to isolate traffic between different users, thus providing better security. Limiting the broadcast traffic within the same VLAN broadcast domain also enhances performance. Q-in-Q, the use of double VLAN tags, is an efficient method to enable subscriber aggregation.

Isolated Group for Port Protection
The isolated group feature allows certain ports to be designated as protected ports. All other ports are non-isolated. Traffic between isolated group members are blocked. Traffic can only be sent from the isolated group to the non-isolated group.

802.1x Port-Based Network Access Control for Improved Network Security
The 802.1x feature enables user authentication for every network access attempt. The port security feature allows users to limit network access to non-registered users. By enabling these features, users can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

802.1d Compatible & 802.1w Rapid Spanning Tree
For environments with multiple switches supporting STP, users can configure the switches with a backup bridge path, so transmission and reception of packets can be guaranteed in the event of a switch fail-over.

Broadcast/Multicast/Unknown-Unicast Storm Control
To prevent broadcast, multicast, or unknown-unicast flooding in the network, the storm control function can be used to restrict excess traffic. Threshold values are available to control the limit rate for each port. Packets will be discarded if the count exceeds the designated upper threshold.



Network Interface

 
WAN
 SECURITY
OUTPUT POWER
10/100Mbps TP Jack (RJ-45) TP (RJ-45) 1 to 24

1000Mbps SFP Fiber Module
Dual-Media Auto-Detection

TP (RJ-45) / SFP

25 to 26


​Hardware Specifications

 
 Feature Description

Voltage

100~240V

Frequency

50~60Hz
Consumption 14W

Ambient Temperature

0° to 50°C
Humidity

5% to 90%

Dimensions

240 (W) x 44 (H) x 200 (D) mm

Weight

Principal: 1.44Kg
Package: 2.48Kg

Safety

Complies with FCC Part 15 Class A & CE Mark approval



Packing information

 
Carton Dimensions (mm Pcs / Carton  N.W (KG G.W (KG)

420 (W) x 370 (D) x 300 (H)

5

11.5

12.5

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.