500Mbps Nano PowerLine Adapter with Integrated Power Socket
HP-5101AC
  • Easy plug-n-play setup and 128 bit AES security
  • Maximum powerline speed of 500Mbps
  • Backward compatible with 200Mbps powerline adapters
  • Features energy saving mode to reduce power consumption
  • Utilizes existing electrical wires to transmit network data
  • Powerline transmission range up to 300 meters
  • Integrated power socket with noise filter



Transmit Network Data via Existing Electrical Wires
The Edimax HP-5101AC can turn the existing electrical wires in your home or office into a high-speed network. Complicated, disruptive and unsightly cabling is no longer necessary - if your home or office doesn’t have an existing Ethernet cable infrastructure, the HP-5101AC enables you to create a network environment easily and cost-effectively.

Integrated Power Socket with Noise Filter
With the Edimax HP-5101AC, no electrical outlet goes to waste. It is built with an integrated power socket, which you can use with any electrical device. So even when the HP-5101AC is plugged into a socket, you can still plug another electrical device into the HP-5101AC and have your usual socket capacity. The in-built noise filter also ensures that you do not experience a sudden drop of network speed when a high power consuming electrical device is being used.

500Mbps AV500 Standard & IGMP Support
The Edimax HP-5101AC supports IGMP managed multicast streams. The HP-5101AC can transmit network data over existing electrical wires at speeds of up to 500Mbps. It is also backward compatible with the 200Mbps AV200 standard and has a transmission range of up to 300 meters. IGMP can be used for online gaming and video streaming applications, and allows for more efficient use of network resources. With the HP-5101AC, you can transfer high-definition video and digital audio quickly and easily.

128-Bit AES Encryption
With built-in compliance with the 128-bit AES encryption standard, the Edimax HP-5101AC provides superior powerline network security.


 

 



 

APPLICATION DIAGRAM
 

  • Plug an HP-5101AC to a power outlet and connect it to a broadband router.
  • Plug another HP-5101AC to a power outlet and connect it to a computer's Ethernet port to establish a powerline connection.

Edimax HP-5101AC application iagram
​*Powerline adapters must be deployed in sets of two or more.

500/200Mbps is the maximum theoretical communication speed at the physical layer via electric power lines based on the IEEE 1901 standard.
 


NANO SIZE DESIGN
 

  • The HP-5101AC fits perfectly into existing wall sockets
  • The HP-5101AC ‘s nano size, low profile design is slim and compact, meaning it only occupies a single power socket.

Edimax HP-5101AC size



VIDEO 

 

 HP-5101ACK PowerLine Adapter Kit with Integrated Power Socket (2 pcs of HP-5101AC)

 



SPECIFICATIONS
 Hardware
 Standards
 Functions
•1 x Power jack
•1 x Power socket
•1 x 10/100Mbps Fast Ethernet port
•1 x Group/Reset button
•IEEE 1901
IEEE 802.3
IEEE 802.3u
Supports IPv6, IGMP, and MLD snooping
Supports VLAN pass-through
Integrated Quality of Service (QoS)
Utility software
 LED
 Modulation Schemes
 Operating Range
Power
Ethernet
Powerline
OFDM 4096/1024/256/64/16/ 8 QAM, QPSK, BPSK and ROBO Modulation Schemes
Up to 300 meters
 Frequency Band
 Security
 Temperature & Humidity
2-68MHz
128-bit AES link encryption
0-40 degrees Celsius
10-90% (non-condensing)
 Power Input
 Dimensions
Certifications
100-240V AC, 50-60Hz
93 57 x 39 mm
CE
 

 

PACKAGE CONTENTS

  • Powerline adapter x 1
  • Quick installation guide x 1
  • CD with setup wizard, user manual & multi-language QIG x 1
  • Ethernet cable x 1
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.