Wired / Wireless USB MFP Server

PS-1206MF

  • Complies with IEEE 802.3/802.3u standards (all models), and wireless 802.11b/g standards (PS-1206MFg only)
  • Includes multilingual EZmax Setup Wizard
  • Shares MFP (All-in-One) printer* among network users
  • Compatible with most popular MFP printers*
  • Supports LPR, IPP and RAW printing protocols
  • Supports DHCP Client protocols
  • Supports Auto MDI/MDI-X
  • Compatible with Windows 2000/XP/Vista, MAC OS 10.4.x and above


Broad Selection of Printing Methods

When configuring PS-1206MF as a print server, it support a wide selection of printing protocols such as LPR, IPP, SMB/TCP and RAW printing. They can also work with different network protocols like, TCP/IP, IPX/SPX, NetBEUI, and Apple Talk. This gives you a variety of printing methods to choose from based on your requirements.
 

Fault-Tolerant Firmware Upgrades

Now, users need not worry about errors occurring in the midst of an upgrade that may subsequently stop its operations. PS-1206MF MFP servers incorporate a fault-tolerant upgrade function that permits re-upgrading of the device should problems occur during the initial or previous upgrade session.
 

Secured Wireless Communication via 64/128-bit WEP, WPA Encryptions

PS-1206MF have an IEEE802.11b/g wireless interface that makes a wireless connection possible. With this add-on flexibility, you can locate the PS-1206MF and the printer even at a place that does not have an Ethernet connection. WEP and WPA encryptions are available in case the safe transmission of data is your concern.
 

User-friendly Setup CD Wizard and Driver*

To facilitate connection to your printer the PS-1206MF includes a user-friendly EZmax setup wizard. Its easy-to-use windows installation wizard simplifies and enhances driver installation for immediate use of the device. An add-on feature allows you to conveniently configure the MFP server from any network client that support web-browsing.
 
* The EZmax Setup CD Wizard only supports Edimax print servers.


SPECIFICATIONS
 
STANDARDS & HARDWARE INTERFACE CPU / MEMORY POWER ADAPTER
  • IEEE802.3, IEEE802.3u
  • Wireless 802.11b/g (PS-1206MFg only)
  • One USB port
  • One 10/100Mbps LAN port
  • Reset button
  • One 2dBi antenna (PS-1206MFg only)
  • PS-1206MF only:
    • RISC CPU
    • 512KB NOR Flash
    • 2MB SDRAM
  • PS-1206MFg only:
    • RISC CPU
    • 1MB NOR Flash
    • ​8MB SDRAM
  • 7.5VDC / 0.5A (PS-1206MF only)
  • 5VDC / 1A (PS-1206MFg only)
INSTALLATION & MANAGEMENT KITS SECURITY LED Indicators
  • Multilingual EZmax Setup Wizard
  • Admin Utility included
  • Web-based Management
  • Firmware upgrade utility
  • 64/128-bit WEP Encryption and WPA-PSK security (PS-1206MFg only)
  • PS-1206MF only: READY, STATUS, LAN
  • PS-1206MFg only: WLAN, STATUS, LAN
SYSTEM REQUIREMENTS OUTPUT POWER HUMIDITY & TEMPERATURE
  • CPU: Pentium III 1G above or similar
  • Memory size: 256MB RAM
  • One CD-ROM drive
  • Hard Disk: Min. of 100MB disk space
  • MFP Printer
  • Wireless 802.11b/g or Fast Ethernet network
  • 16dBm - 18dBm (PS-1206MFg only)
  • 10~90% (Non-condensing)
  • 0~55°C
DIMENSIONS CERTIFICATIONS
  • 62 (W) x 22 (H) x 77 (D) mm
  • CE, FCC

 

TYPICAL SETUP DIAGRAM AND RELATED PRODUCTS

* Please check the list of compatible MFP printers before you make your purchase.
* Product features and specifications are subject to change without notice.

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.