USB 2.0 Fast Ethernet Adapter
EU-4207

(End-of-Life Product)

  • Complies with USB 2.0 and USB 1.1 specifications
  • Compatible with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX), and T4 standards
  • Single chip USB to 10/100 Mbps Fast Ethernet controller
  • Embedded 20KB SRAM for RX packet buffering and 20KB SRAM for TX packet buffering
  • Supports both full-duplex and half-duplex operations
  • Supports suspended mode and remote wake-up (link-up or magic packet)
  • Powered by USB port. No external power adapter required
  • Equipped with diagnostic LEDs
  • Plug & Play installation
  • PHY power down mode for power saving
  • Compatible with Microsoft Windows 2000, XP, Vista, and Mac OS 10.1 & above



Compatibility and Convenience
The EU-4207 Fast Ethernet Adapter allows your computer to instantly connect to a 10/100Mbps network simply via USB port. With the EU-4207, you avoid the hassles of opening up your computer case to add an internal network card. The EU-4207 is also backward compatible with the USB 1.1 specification. Featuring plug-and-play, the adapter requires no complicated installing procedures. EU-4207 can likewise seamlessly function under Microsoft Windows 2000, XP, Vista, and Mac OS 10.1 & above.

Smart Alternative for Gaming Use
The EU-4207 is also an ideal USB-to-LAN alternative for gaming console that needs network access in an environment lacking wireless capability.

Bus Powered Performance in a Compact Size
Compared with USB 1.1 standard which offers 12 Mbps speed, the EU-4207's compliance with USB 2.0 (480Mbps) ensures true 10/100 Mbps network speed without any compromise. Furthct size of EU-4207 highlights its USB bus-powered feature that does not require an external power adapter. ermore, the compaAn ideal solution to decongest a crowded workspace.

Features

  •  Complies with USB 2.0 and USB 1.1 specifications
  • Compatible with IEEE 802.3 (10Base-T) and 802.3u (100Base-TX), and T4 standards
  • Single chip USB to 10/100 Mbps Fast Ethernet controller
  • Embedded 20KB SRAM for RX packet buffering and 20KB SRAM for TX packet buffering
  • Supports both full-duplex and half-duplex operations
  • Supports suspended mode and remote wake-up (link-up or magic packet)
  • Powered by USB port. No external power adapter required
  • Equipped with diagnostic LEDs
  • Plug & Play installation
  • PHY power down mode for power saving
  • Compatible with Microsoft Windows 2000, XP, Vista, and Mac OS 10.1 & above


INTERFACE DATA TRANSFER RATES  LED INDICATORS
  • USB 2.0 High -Speed
  • Backward compatible with USB 1.1
  • Network interface via RJ45 female jack
  • Ethernet: 10Mbps/20Mbps (Half/Full Duplex)
  • Fast Ethernet: 100Mbps/200Mbps (Half/Full Duplex)
  • POWER
  • LINK
 RAM POWER MANAGEMENT POWER CONSUMPTION
  • Embedded 20KB SRAM for RX packet buffering and 20KB SRAM for TX packet buffering
  • Suspend Mode
  • Hibernation Mode
  • 850mW
SYSTEM REQUIRMENTS OPERATING TEMPERATURE AND WEIGHT

DIMENSIONS AND CERTIFICATIONS

  • CPU: Pentium 233MHz above or MAC
  • Memory size: min. of 64MB RAM
  • One available USB slot
  • Windows 2000, XP, Vista™ 32/64-bit; Mac OS X 10.x
  • 0oC - 70oC; 90% humidity
  • 58g
  • 72 x 26 x 52 mm
  • CE, FCC



TYPICAL SETUP DIAGRAM AND RELATED PRODUCTS

 

 



*  Product features and specifications are subject to change without notice.

 

 

 

 

 

 

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.