16 Ports Fast Ethernet Switch

ES-3116P

(End-of-Life Product)

  • 16 Ports 10/100Mbps Switch
  • Half / Full Duplex Auto Negotiation
  • Non Blocking Design
  • Store and Forward Switching Architecture
  • Desktop Size, Compact and Slim Design


200Mbps Full Duplex Transmission 
Edimax ES-3116P is a high speed fast Ethernet switch for home and small business. ES-3116P not only complies with IEEE 802.3/802.3u 10/100Mbps Ethernet standard but also supports full duplex transmission. The full duplex feature can double the network throughput on every port. It is used for high speed server or switch-to-switch connections. The maximum throughput of every port can reach up to 200Mbps .

Supports Wire-speed and Flow Control
The ES-3116P built-in non-blocking and store-and-forward architecture feature your network with full-wire speed connections. It accommodates with flow control for full duplex mode and back pressure for half-duplex mode which ensure reliable data transfer and help to prevent data lost. Use ES-3116P to create a high-speeds network and benefit from it's ultimate performance and reliability.

Supports Auto-MDI/MDI-X and Auto Sensing
ES-3116P supports PnP (plug and play) installation and auto-MDI/MDI-X function. You can connect ES-3116P with computers or Ethernet devices without any configuration. You also can use either straight-through or cross-over Ethernet cable and combine 10 and 100Mbps devices into ES-3116P.The switch will automatically detect the right cable and speed for your device.



HARDWARE INTERFACE

FUNCTION

POWER ADAPTER

  • 16 x RJ-45 Fast Ethernet LAN Ports
  • LED Indicators: Power, LNK/ACT for LAN
  • Power
  • Non-Blocking
  • Store-and-Forward architecture
  • Full wire speed filtering
  • Auto-MDI/MDI-X and auto learning
  • Auto-negotiation
  • DC 12V, 1A

STANDARD

HUMIDITY & TEMPERATURE
MEMORY BUFFER
  • IEEE802.3 and IEEE802.3u
  • IEEE802.3x
  • 10-95% (Non-condensing)
  • 0~45 Degree Celsius
  • 160K Bytes
MAC Address

DIMENSION

CERTIFICATIONS
  • 8K
  • 290 x 100 x 30 mm
  • CE, FCC

NETWORK SETUP DIAGRAM AND RELATED PRODUCTS

An example to setup ES-3116P:
  • Connect the ES-3116P to your Router or cable/ xDSL modem.
  • Connect computers to ES-3116P.
  • You can also connect Print Server, NAS and IP CAMERA to ES-3116P

     

     

*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.