24 Ports Fast Ethernet PoE + Web Smart Switch with 2 Gigabit Combo Ports(390W)
ES-5824P
  • Complies with IEEE 802.3/802.3af/802.3u/802.3x/802.1p/802.1q standards
  • Power consmption: 390 Watts
  • Provides Store-and-Forward architecture
  • Provides port-based remote power control to restart connected PoE devices individually
  • Supports Auto-MDI/MDI-X and Auto-Negotiation
  • Features power consumption UI to optimize the power usage for connected PoE devices
  • Supports 26 port-based VLAN and 32 tag-based VLAN groups
  • Supports 2 trunking groups (4 ports per group and up to 2 groups for each device)



Edimax's ES-5824P switch is a superb choice for boosting your medium to large network's performance and efficiency. The 24-port Fast Ethernet PoE+ Web Smart Switch with 2 Gigabit Combo Ports is designed to seriously strengthen the network connection of your network environment. The 19" switch (including rack-mount brackets) will fit neatly into your existing rack environment.
 
Complies with IEEE 802.3at Power over Ethernet (PoE) ports
Edimax's ES-5824P features 24 IEEE 802.3at Power over Ethernet (PoE+) ports that supply up to 30 watts of electricity per port. It can convert standard 100~240V/AC power into low-voltage DC that runs over existing LAN cables to supply power to IEEE 802.3at compliant network accessories. The Edimax ES-5824P features PoE+ device detection to verify whether individual, connected devices are IEEE 802.3at compliant or not, so only data will be sent via the LAN cable if the device is not a PoE or PE device. Various PoE products such as Access Points, IP cameras or IP phones are easily connected to the switch, making it the perfect solution when power outlets are difficult to install or existing power outlets are too far from devices.
 
No Special Networking Cable Required
Reduce your installation time and cost by using a standard Cat-5 Ethernet cable to link between the Edimax ES-5824P switch and powered devices (PD). The Ethernet cable will then transmit both data and power, so you won't need all those extra power cables to your powered devices (PD).

Supports Smart Features
Edimax's ES-5824P Web Smart features put you in control of your network and offers extra protection on the network edge. It can be managed through a Web Browser and smart features include everything from simple QoS/CoS applications and basic monitoring tools to improve network efficiency, to a remote access password-protected configuration interface for the IT manager's mobility and IGMP snooping to reduce broadcast traffic from streaming and other bandwidth intensive IP applications. The ES-5824P also supports bandwidth control and port based VLAN, so an administrator can set up VLANs to segregate traffic, QoS to prioritize mission-critical data and link aggregation to create fat traffic pipelines.
 
Performance and Scalability
The ES-5824P is high performance architecture of switch that is capable to provide the non-blocking switch fabric and wire-speed throughput, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands.
There are two Gigabit Ethernet combo ports for uplink flexibility, allowing copper or fiber uplinks.



Standard IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3x Full-duplex and Flow Control
IEEE 802.1Q VLAN
IEEE 802.1p QoS / Class of Service, Priority Protocols
IEEE802.3 Nway Auto-negotiation
IEEE802.3af/at Power over Ethernet
Features Number of Ports:
- 10/100BaseTX with RJ-45 Connectors: 24 port with 24 PoE(Half power) port
- 10/100/1000BaseT with RJ-45 Connectors: 2 / Combo SFP Open Slots: 2
MAC Address: 4K
Buffer Memory: 343KB
Transmission Method: Store and Forward
Smart Features Port Security Filter:
- TCP / UDP port based
- MAC Address based
- IP Address based
VLAN Setting:
- Tag Based: 32
- Port Based: 26
- VLAN ID ( Up to 4094 K )
QoS:
- Priority ( Port Based / TOS / Diffserv / DSCP/IPv4 /IPv6 )
- Class of Service Configuration
- TCP / Based
Management:
- Password-protected Access
- On / Off Settings,
- Web-Based Management
- Graphic User Interface
- Bandwidth Control
- Broadcast Storm Control
- Port Mirroring
- Port Configuration
- Programmable aging timer
- IGMP Snooping
- Trunk ( up to 4 Ports per Group, 2 Groups per Device )
- Provide DHCP Client
- Quality of Service: up to 2 queues
Filtering/Forwarding Rates 1000Mbps port – 1,488,000pps
100Mbps port - 148,800pps
10Mbps port - 14,880pps
Transmission Media 10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5E UTP/STP
LED Indicators Per Port: Link/Act,
PoE : Act / Status
Per Unit: Power
Power Input 100~240V/AC, 50~60Hz
Power Output 48V /DC Per Port Output
Power Consumption 390 Watts
Dimensions 440 × 332 × 42(L x W x H)
Operating Temperature 0 to 55℃
Storage Temperature -20 to 90℃
Humidity 10 to 90% RH (non-condensing)
Certifications FCC Class A, CE
*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.